**Temporarily Out Of Stock**   

BLEMISHED – these starters have some form of cosmetic flaws typically in the powder coat or plating but are otherwise identical to the 1st grade starters

The Burris Mini-Lite self-contained starter packs a lot of power into a small package. The powder coated billet aluminum frame houses the 1.4kw high torque gear reduction motor and the sealed lead acid battery into a unit that weighs less than 18 lbs making it nearly 40% lighter than our competitors traditional self contained unit. The Burris Mini-Lite has been used successfully on Clone, Yamaha, Briggs, Tecumseh, HPV and KPV and nearly all commonly found Karting engines.

Do your back a favor and step up to the best Kart starter on the market!

100-RH-6 = Mini-Lite starter with ½” square for socket and retention bolt

*Standard right hand rotation – traditionally used for 2-cycle applications with the engine mounted on the right side of the kart

*Left Hand rotation is only available in 2.0kw motor

*Select the shaft length. Standard length is 11.5″. The 3″ & 6″ short shafts are for applications that require less reach

*Upgrade to the 2.0kw motor with 40% more cranking power than standard 1.4kw for hard to start applications

*Add the 3rd handle option for a centered carrying handle

(Shown with 3rd handle option)

DO NOT CONTINUOUSLY TURN THE ENGINE OVER FOR MORE THAN 5 SECONDS AT A TIME TO DRAW FUEL OR IF YOU ARE HAVING A FUEL/SPARK ISSUE. THIS WILL OVERHEAT THE STARTER AND SOLENOID AND MAY CAUSE A FAILURE.